"The current model Steenbeck machines are designed for Super-8 picture
and 16mm fullcoat track. Future models will have the option of Super-8
fullcoat. One machine allows the interchanging of Super-8 and 16mm picture
heads. Both machines are equipped with optical/magnetic single-system sound
readers.The ST 1068 S is a non-interchangeable four-plate
model ($5800). The viewer is bright and the image is a fairly sharp 6"x8".
Functions parallel those of standard Steenbeck tables. 24 fps sync speed plus
a variable speed from 1-200 fps forward/reverse. The drive system employs an
electronically governed DC motor and is operated via a switch lever. The
picture transport is very easy on film and enables the viewing and editing of
original footage.
Unlike most Super-8 tables, the Steenbeck accepts up to 1000-ft cores.
If reels are used, the capacity is 600 feet. There is a footage counter, or a
minute/second counter.
The sound reproduction is very good. It is unfortunate that recording
heads and amplifiers are not part (or anoption) of the machine. Recording
capability would have made this a much better bargain and a much mor euseful
machine.
A Super-8 picture module is available for use with the six-plate ST
6000 machine. The basic 16mm machine costs about $8000.00 and the Super-8
picture module about $1500.00. This module is also equipped with a mag/optical
stripe reader for single-system film. Despite high quality sound, there are no
mixing or recording provisions on this table either"
(American Cinematographer, November 1975, p.
1303).